LED GO LG-R320C LED RING LIGHT 32W BI COLOR WITH AC ADAPTER AND CARRY BAG
Product Information: https://www.vistek.ca/store/ProVideoLighting/409130/led-go-lgr320c-led-ring-light-32w-bi-color-ac-adapter-carry-bag.aspx
Also controllable remotely using the LEDGO WiFi Control box! See: https://www.vistek.ca/store/ProVideoLighting/281831/led-go-24g-wifi-control-box.aspx
LED Go Products & Accessories Available at Vistek: https://www.vistek.ca/search/-LED%20Go/led%20go.aspx
This ultra soft LED ring light is bi-colour & brightness adjustable, and is easy to mount on camera for shooting anywhere.
Setup Instructions:
1. From the carry bag, remove the:
- Ring Light;
- Sony NP-F750/970 Batteries (sold separately);
- AC Adapter;
- Power Cord for AC Adapter;
- Dual Rod Mounting Plate;
- Ring Light Handle
2. Attach the Handle to the bottom of the Ring Light.
3. Place the Ring Light on a light stand by attaching the Handle to the stand's spigot and tightening it.
4. Slide the Mounting Plate rods through the rod clamp located on the back of Ring Light, and tighten.
5. Attach the camera to the Mounting Plate (aligning the bottom of the camera with the mounting screw on the plate) and tighten.
6. Insert Power Cord into the AC Adapter. The Adapter can also be affixed to the light stand via the clamp on the Adapter.
7. Insert power connector to the 12-18V DC input on the back of the Ring Light.
8. Power switch is located on the back of the Ring Light.
9. The upper dial on the Ring Light controls brightness, while the bottom dial controls colour temperature.
10. As a more portable alternative to AC power, insert two Sony NP-F750/970 Batteries (sold separately).
11. Ring Light can be used without a light stand, and handheld using the Handle.
12. The Handle is highly flexible, and can be adjusted to achieve a variety of lighting methods from different angles.
